Skip to content

USB Armory

Source Image: https://dev.inversepath.com/download/usbarmory/

Windows 10 Driver Issue

Driver is installed but found as "Serial" "USB device(COM3)" in the device manager "Update" the driver an use this instead: http://web1.moddevices.com/shared/mod-duo-rndis.zip Alternative Guide: https://github.com/ev3dev/ev3dev/wiki/Setting-Up-Windows-USB-Ethernet-Networking

Connect to USB armory

A new network device should show up Change settings of IPv4 to:

IP: 10.0.0.10
Subnet: 255.0.0.0
Gateway: 10.0.0.2

Run ssh to 10.0.0.1 Default credentials are:

  • User: usbamory
  • Password: usbamory

Configure USB armory

  • add internet access
  • run updates
  • configure for usage...
Back to top